ACI Marina Opatija
Facilities & Weather Forecast

one of the best marinas in Croatia, with over 1000 berths, shipyard and all necessities in state of art form. Sheltered from all prevailing winds.

Our activities Maintenance of vessels and berths We have more than 100 berths in our port. We will soon publish a berth plan, in which you will see that our port is one of the busiest ports on the Adriatic. Participation and organization of the competition Our sports teams are one of the best in Croatia. We have world and European champions, seniors and juniors are always at the top in all competitions. Sports preparation and instruction In order to achieve the best possible results in competitions, our sports section organizes trainings, runs a fishing school and trains the youngest ages for great results. Sports recreation Most of our members hunt recreationally. The most important tools they use are longlines, pots, pans and squid fishing, and hunting from a boat and from the mainland. Water and sea protection We pay great attention to environmental protection and clean sea. We carry out many activities related to ecology, and we teach young people not to throw anything into the sea. Management of sports facilities In addition to the main building, which houses the club's secretariat and cafe, we also maintain the oldest fishing houses on the Adriatic, protected by UNESCO, and we have a small building where we maintain a fishing school. Self-construction of vessels, equipment and accessories Our society supports the self-construction of vessels and the preservation of traditional boats. We also have professional staff in self-construction and maintenance of vessels. We also have excellent anglers for making longlines, pots, nets ... Encouraging creativity and creativity of children and youth in technical culture Our professional boat renovators, whether in wood or fiberglass, pass on their knowledge to the young members of the club, giving them the vast knowledge they have gained through years of hard work. We must not lose those old crafts!

Wi - fi internet Parking Total number of berths : 20 Number of transit berths: 20 Number of land berths: 70 Maximum draft: 2,0 m Water connection Electrical outlet Shower WC Boat service Crane DISTANCE TO: Fuel station for boats: 2000 m Boat equipment store: 2500 m Distances Beach: 50 m Restaurant: 50 m Shop: 200 m Sports facilities: 1500 m

Small fishing port The port area consists of the coastal land part and the associated water area. By transferring the borders of the port area to the cadastral plan, it follows that the land part of the port area consists of the cadastral parcels of KO Cres, namely: 5296 part, 2652 part, 2055 part, 2056 part, 2390 part and 3773 part. The ownership of the plots is registered as public property - coast and roads. The port consists of an operational main wharf, an operational waterfront, protective wharves (eastern and western), quays for boats and a plateau for servicing boats. The operational main pier is 120 meters long, 12 meters wide, 4 to 7 meters deep along the pier, and has the capacity to moor 2 large ships or more small ones, depending on the size. The operational coast is 65 meters long, with a depth of 3.5 to 4 meters along the coast and the capacity to moor 1 large or 3 smaller ships. The protective piers (eastern and western) are 20 and 70 meters long, respectively. On the inside, they are used for mooring boats, while the outside is used to protect the water area and seasonally moor boats. The shores for mooring boats have a total length of 550 meters, a depth of 1 to 3 meters and a mooring capacity including protective jetties for 240 boats. The boat servicing platform is 500 m 2 in size . The operational main wharf, the operational shore, the protective wharves and the shores for boats are of massive stone and concrete construction and are in relatively good condition for use. The operational main wharf, especially its surface made of stone pavement, is in a state of disrepair due to the time of use and access by heavy vehicles. The harbor is equipped with mooring devices, a harbor light and a 3-ton crane for boats. Furthermore, the port is connected to the road, water supply, electricity and telephone. In the immediate vicinity there is a shipyard and a fuel supply station.

Marina Admiral is a part of hotel Admiral's complex, so hotel's facilities and services are at disposal to all boat owners who keep their boats in the marina. Marina is suitable for the disabled people. Open: • All year long Berths: • 160 berths • 40 dry docks • all berths have water and power supply • for boats with length over 20m price is calculated on agreement • marina is safe for berthing smaller boats (speedboats) Services: • power supply, sanitary facilities, drinking water • constant surveillance and security • marina liability insurance • cleaning services for boat underside • warehouse renting (48 units available) • 5 ton capacity crane • towing services • use of tractor • intervention in case of broken rope • we do not offer boats for charter Facilities: • reception • ecological waste management • laundry service Harbour Master's Office Opatija Zert 3, 51410 Opatija Tel. +385 51 711 249 Opening hours: 7.00-14.00 (closed on Sundays)

The port of Opatija-mooring Ičići covers an area of ​​31,116 m 2 , of which 3,575 m 2 is land and 27,541 m 2 sea area. The harbor consists of an operational wharf and a protective wharf, a breakwater and shores for mooring vessels approx. 130 m long. The operational wharf is 24 m long, 3 m deep along the coastal wall, and has the capacity to moor 2 smaller vessels. The protective jetty has the function of protecting the water area, mooring boats and is 20 m long. The breakwater has the function of protecting the water area, and the inner side is used for the mooring of vessels. It was built from a 200-meter long stone thrower. The shores for mooring vessels are of the type of massive coastal walls with a total length of 200 meters and a depth of 1.5 meters. The port is equipped with devices for mooring vessels and a slipway for vessels. The port has a communal part of the port for mooring vessels with a capacity of 154 berths and 13 nautical berths. It has a connection to the road, water supply and electricity. By the decision of the Primorje-Gorski Kotar County, and with the prior consent of the Government of the Republic of Croatia due to the particular economic interest of the Republic of Croatia, in 1999 the Opatija - Lovran - Mošćenička Draga County Port Authority was established for 10 ports: Preluk, Volosko, Dražica, Opatija, Portić, Ičići , Ika, Lovran, Medveja and Mošćenička Draga, with the aim of managing, using and building ports of county and local significance.

The port of Mošćenićka Draga covers an area of ​​24,871 m 2, of which 1,877 m 2 is land and 22,994 m 2 is sea area. The port consists of an operational coast, a protective jetty-breakwater and shores for mooring vessels. The operational coast is 72 m + 15 m + 61 m long, with a depth of 2.5-4.5 meters along the coastal wall. The protective jetty-breakwater has the function of protecting the water area and is used for the mooring of vessels. It is 30 meters long. The banks for mooring boats are of the type of massive coastal walls with a total length of 140 meters and a depth of 0.5–2.9 meters. The port has a communal part of the port for the mooring of vessels with a capacity of 62 berths and 6 nautical berths. The port is equipped with devices for mooring boats, a harbor light, a slipway and a crane for ships with a capacity of 3 tons. It has a connection to the road, water supply and electricity. Within the harbor there is an eco-storage together with an eco-container for waste oils. In the harbor there are also two smaller brick warehouses and a room with a cooling device for the needs of fishermen.

The port of Lovran covers an area of ​​45,893 m 2, of which 3,737 m 2 is land and 42,156 m 2 sea area. The port consists of an operational and protective jetty and operational shores (northern, southern and eastern) and moorings for vessels. The operational and protective jetty is 60 meters long, with a depth of 3 to 4.5 meters along the coastal wall. The outer part of the jetty has the protective function of a system of stone throwers (scholars). The operational northern shore, 13 m + 18 m long, with a depth of 4 to 5 meters along the coastal wall, is also used as a protective jetty at the port entrance. The operational southern coast is 60 m long, with a depth of 4 to 5 meters along the coastal wall. The coast is exposed to the action of the sea without natural and artificial protection (offshore). The operational eastern coast is 60 m long, with a depth of 4 to 6 meters along the coastal wall. The coast is exposed to the sea without natural or artificial protection. Part of the harbor-berth for vessels, total length 135 meters, depth along the coastal wall 0.6 to 2 meters. Then a protective jetty 50 meters long, a working level of 120 m 2 and a small protective jetty at the entrance 7 meters long. The port has a communal part of the port for mooring vessels, with a capacity of 77 berths. The port is equipped with mooring devices, harbor lights, a crane for boats with a capacity of 3 tons and a slipway for boats, road traffic, water supply, electricity. Within the port, there is an eco-container for receiving waste oil in a visible place. The city's urban environment offers all the necessary service standards.

Port of Opatija - passenger port + mooring Dražica covers an area of ​​1,622,724 m 2 of which 7,497 m 2 is land and 1,615,227 m 2 sea area. The port consists of a 110 m operational quay for boarding and disembarking passengers in international traffic, a 50 m + 60 m + 30 m + 15 m + 60 m operational quay for the purpose of loading and unloading domestic passengers for supplying fuel to vessels 34 m in length. Port of Opatija has 43 nautical moorings, of which 37 are at the nautical anchorage, as well as the anchorage for accepting larger passenger ships. The anchorage is located in front of the harbor and is defined by points: A 45°20´43´´N 14°19´44´´E B 45°20´20´´N 14°20´22´´E C 45°19´45´´N 14°19´42´´E D 45°19´59´´N 14°19´11´´E E 45°20´17´´N 14°19´14´´E All parts-objects of the port are of massive stone and concrete construction and are in good condition for use. The port of Opatija with the mooring Dražica has a communal part of the port for the mooring of vessels with a capacity of 212 berths. The port of Opatija has a pier for tenders and barcarioles, as well as a parking lot. The harbor is equipped with devices for mooring vessels, a harbor light, a crane for vessels with a capacity of five tons and a smaller manual crane for vessels, as well as a small slipway for vessels as well as storage for tools. The port is also connected to the road, water supply, electricity and telephone. Garbage containers and eco warehouses are located in a visible place within the port along with an eco container for waste oil, an eco container for old batteries and an eco container for used and oily rags. Accommodation in the city provides all other services of a higher standard. The Dražica mooring, which is located next to the port of Opatija itself, consists of a breakwater approx. 20 m long and shores for the mooring of vessels from one to two meters, it functions as a defence of the harbor waters and is used for the mooring of boats. It is of massive construction type, made of stone and concrete, and is in good condition for use. The port also consists of communal moorings used by the local population. Within the mooring there are also storage rooms for tools, and a small slipway for vessels. The port is equipped with devices for mooring boats.

The port of Volosko covers an area of ​​55,913 m2, of which 3,139 m 2 is land area and 52,774 m 2 sea area. The harbor consists of a protective operational breakwater, an operational jetty, shores for mooring boats and a boat ramp. The protective breakwater is 90 meters long, with a depth of 2.3 meters to 4.1 meters along the breakwater. The operating jetty is 54 meters long, with a depth of 2.3 to 3.7 meters along the jetty. The coast for the mooring of vessels has a total length of approximately 300 meters, a depth of 0.8-3 meters. Mandrać for boats is an ancient part of the harbor with a square shape measuring 20 X 20 meters. All parts-objects of the port are of massive stone and concrete construction, and are in good condition. The port is equipped with mooring devices, two harbor lights and a slipway for boats. The port of Volosko has a communal part of the port for the mooring of vessels, with a capacity of 230 berths. It has connection to water supply, electricity and road traffic. Within the port, there is an eco-container for receiving waste oil in a visible place. Accommodation in the city provides all other services of a higher standard.

The port consists of an operational jetty and a shore for mooring boats. The operational jetty is 45 meters long, 3 to 4 meters deep along the jetty, and has the capacity to moor 3 smaller ships and several small boats. The coast for mooring boats is naturally rocky, with temporary concrete moorings with a capacity of 20 boats. The port is equipped with devices for mooring boats and a slipway. It has a connection to the road.

The Port of Opatija-mooring Portić covers an area of ​​14,251 m 2 , of which 587 m 2 is land and 13,664 m 2 sea area. The harbor consists of protective piers and shores for mooring vessels. The protective piers at the entrance of the harbor are 10+10=20 meters long and have the function of defending the waters of the harbor and are used for the mooring of vessels. The piers are of massive stone and concrete construction and are in good condition. The quays for mooring vessels are 50 meters long, up to 1 meter deep, and are of massive stone and concrete construction. The harbor is equipped with devices for mooring communal vessels for 13 vessels and a small slipway.